ロフィン・バーゼル

Laser Marking of Organic Materials 

Tried and Tested Technology

 
テキスト The cutting in two dimensions is a domain of the CO2 laser. Typical cutting speeds for mild steel are for example at 18m/min for 1 mm, 4.5 m/min for 3 mm and 1.5 m/min for 8 mm material strength. Basically, the cutting of metals with lasers happens through the local heating of the material above its melting point in the focal point of the focused laser. The resulting molten material is ejected by a gas flow oriented coaxially to the laser beam so that a kerf is formed.
 
テキスト For low-alloyed steels in particular, oxygen is typically used as cutting gas. At the moment the maximal processable counter thickness for laser flame cutting of steel is approximately at 25 mm.
 

Marking of Organic Materials

schreiber_01.jpg テキスト Mild steel is the most frequently cut material in the industry. Thus e.g. gears, blinds, coverings or chain links of mild steel are cut using lasers.
 

 

              Features at a Glance

           ・ various organic materials can be processed

           ・ flexible marking contents

           ・ fast process

 
 
 

Product recommendation

For this application we recommend the laser marker: PowerLine C 30