ロフィン・バーゼル
> ROFIN.JP  > アプリケーションストラクチャリングレーザーエングレービング

レーザーエングレービング

Laser Supported Volume Ablation

 
テキスト The cutting in two dimensions is a domain of the CO2 laser. Typical cutting speeds for mild steel are for example at 18m/min for 1 mm, 4.5 m/min for 3 mm and 1.5 m/min for 8 mm material strength. Basically, the cutting of metals with lasers happens through the local heating of the material above its melting point in the focal point of the focused laser. The resulting molten material is ejected by a gas flow oriented coaxially to the laser beam so that a kerf is formed.
 
 

Laser Engraving in Tool-steel

Engraving_01.jpg テキスト Mild steel is the most frequently cut material in the industry. Thus e.g. gears, blinds, coverings or chain links of mild steel are cut using lasers.
 

Micro Engraving of Printing Plates

Engraving_02_Printing.jpg テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.
 

Ring Engraving

Engraving_03_Ring.jpg

テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

For this application we recommend the laser system : Easy Jewel

 

Laser Engraving on Crystals

Engraving_04_Chrystals.jpg

テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

 

For this application we recommend the laser marker : PowerLine E

 

Product recommendation

For laser engraving of metals we recommend the Opens internal link in current windowPowerLine Series