ロフィン・バーゼル
> ROFIN.JP  > アプリケーションレーザー溶接レーザー肉盛溶接

Laser Deposit Welding

Repair and Modification with Reconditioned Quality as well as Wear and corrosion Protection

 
テキスト The cutting in two dimensions is a domain of the CO2 laser. Typical cutting speeds for mild steel are for example at 18m/min for 1 mm, 4.5 m/min for 3 mm and 1.5 m/min for 8 mm material strength. Basically, the cutting of metals with lasers happens through the local heating of the material above its melting point in the focal point of the focused laser. The resulting molten material is ejected by a gas flow oriented coaxially to the laser beam so that a kerf is formed.
 
テキスト For low-alloyed steels in particular, oxygen is typically used as cutting gas. At the moment the maximal processable counter thickness for laser flame cutting of steel is approximately at 25 mm.
 

Surface Deposit Welding with Filler Wire

1Depo_Filler_Wire.jpg テキスト Mild steel is the most frequently cut material in the industry. Thus e.g. gears, blinds, coverings or chain links of mild steel are cut using lasers.

For this application we recommend: Select, Integral
 

Processing inside Edges with Filler Wire

2Edge_Filler_Wire.jpg テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

For this application we recommend: Select, Integral
 

ID Cladding Nozzle

3ID_Cladding.jpg テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

For this application we recommend: Fiber lasers of the FL Series
 

Power Laser deposit Welding of Valves

4Power_Depo_Weld.jpg テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

For this application we recommend: Fiber lasers of the FL Series
 

Laser Deposit Welding in the Aviation and Aerospace Industry

5Depo_Aerospace.jpg

テキスト In combination with fiber optic (solid-state laser) or mirror systems (CO2 lasers) also complex, three-dimensional mild steel components can be cut such as hydroformed parts for the automotive industry.

For this application we recommend: Fiber lasers of the FL Series